Flame Safe USA
                         CALL US: 1-800-333-9197 
                   Ph: 817-740 -9197
                    email: [email protected]
2650 Warfield Ave., Fort Worth, TX 76106

Flame Safe fire retardant logo
FIRE POLY FPCC
ASTM E84 Polystyrene Foam Insulation 
EXTERIOR / INTERIOR: FIRE POLY™ FPCC and FP50CC are permanent on interior surfaces unless removed by extraordinary means.   Fire Poly FPCC is water based flame retardant liquid that dries clear and becomes insoluble when dry.  FIRE POLY™ FPCC is warranted for 3 to 5 years or up to 150" of rain, (ASTM E2898 Accelerated Weathering), whichever comes first  Recommend over-coating with exterior latex paint if intended use is for exterior surfaces
APPLICATION:  Be sure surface is clean and dry before treating.  Apply with sprayer head held at 8 to 12 inches from surface. Apply with brush or roller.
MAXIMUM COVERAGE RATE:   150 to 200 sq, ft per gallon   
QUICK REFERENCE FOR APPLYING FIRE POLY FPCC
Ft Worth, Dallas, Austin, Houston, TX, San Antonio, Montgomery, Alabama; Phoenix, Arizona; Los Angeles, California; San Francisco, California; Denver, Colorado; Bridgeport, CT; Washington DC; Miami, Florida; Atlanta, Georgia; Honolulu, Hawaii; Boise, Idaho; Chicago, Illinois; Indianapolis, Indiana; Des Moines. Iowa; Kansas City, Kansas; New Orleans, Louisiana; Baltimore, Maryland; Boston, Massachusetts; Detroit, Michigan; Jackson, Mississippi; Newark, NJ; Santa Fe, New Mexico; New York City, New York; Fayetteville, NC; Bismark, North Dakota; Tulsa, Oklahoma; Portland, Oregon; Philadelphia, Pennsylvania; Providence, RI; Charleston, South Carolina; Sioux Falls, South Dakota; Memphis, Tennessee; Salt Lake City, Utah; Richmond, VA; Seattle, Washington; Charleston, WV; Green Bay, Wisconsin; Jackson, Wyoming; Jacksonville, FL; Key West, FL; Orlando, FL; Panama City, FL; Pensacola, FL; St. Petersburg, FL; Sarasota, Florida; Tampa, Fl; West Palm Beach, FL; Clearwater, Fl; South Beach, FL; Daytona Beach, FL; Fort Lauderdale, FL; Fort Meyers, FL, Fort Walton Beach, FL; Gainesville, FL
Fire retardant plastic pipe
Contact Us
FIRE POLY™ FPCC and FP50CC are extremely high intumescent coatings formulated for flame retarding numerous hydrocarbon substrates including plastics, composites, fiberglass, plastic pipe, PVC, plastic panels and sheathing, polyurethane foam, polystyrene foam insulation, coated cable, EPS, XPS, HDPE and more. FPCC and FP50CC are suitable for interior and exterior use. They comply with ASTM E84 Standard with Flame Spread rating of 0,Smoke Index of 100, Maximum Flame Front 0.They comply with IBC, IRC, NFPA 101: Life Safety Code, NFPA 5000 Building Construction and Safety Code, International Maritime Organization (IMO Resolution A.753), ASTM F1173 Classification Plastic Pipe, 14 CFR Part 19, 14CFR Part 29.853a for Federal Aviation Administration (FAA), NFPA 701 and more... Tests at Intertek Laboratories indicated a Flame Spread rating of 0.0, Smoke Index 100, maximum Flame Front 0.0 and 4" (4000 mils) of intumescent char protecting the plastic substrate. FPCC prevented the plastic from melting through and performed as a thermal barrier leaving the tested plastic substrates intact. FPCC dries clear, recommend overcoating with latex paint for exterior use. FPCC Coverage rate is150 to 200 sq. ft./ gallon. FP50CC 200 sq. ft./ gallon.  Click below for test reports.
​ASTM E84 Polystyrene HDPE Plastic Panel
FLAME SAFE PRODUCTS
​Flame Safe Chemical Corporation is the only fire retardant coatings manufacturer designated by The Federal Emergency Management Agency (FEMA) as a partner under the Project Impact Program. The mission of Project Impact and the partnership with Flame Safe Chemical Corporation is to prevent or to mitigate the loss of lives, property and economic impact caused by fire hazard events. Experience has shown that all of Flame Safe’s products are suitable to achieve this endeavor.  
Fire Retardant fiberglass pipe
FREE SAMPLE
Rigid Foam Insulation
FREE SAMPLE AVAILABLE UPON REQUEST      CALL US +1-817-740-9197 / 1-800-333-9197
Test for appearance, compatibility and efficacy on your designated substrate
OR
DO NOT DILUTE OR MIX FIRE POLY 100 WITH ANY OTHER PRODUCTS.