Flame Safe USA
Ph: + 1-817-740 -9197
email: [email protected]
2650 Warfield Ave., Fort Worth, TX 76106
Fire Retardant wood, fire retardant plywood, fire retardant lumber, millworks, wood specialties, I-Joists, MDF, OSB, particle board, T-111, fire retardant timbers
Dallas, Fort Worth, Austin, San Antonio, Houston, Waco, Odessa, Laredo, Brownsville, El Paso, Corpus Christi, Amarillo, Shreveport, Tulsa, Oklahoma , Dallas, , Plano, Frisco, Dallas County, Tarrant County, Abilene
Flame Safe Products
INTERIOR FIRE RETARDANT
COATING or SPRAY FOR ALL WOOD PRODUCTS
PLYWOOD ● LUMBER ● TIMBER ● OSB ●I-JOISTS
INTERIOR:
All surfaces to be treated must be clean and dry. Wood Safe fire retardant coating is water-based, clear liquid that becomes insoluble when dry. Wood Safe also inhibits mold and mildew protector and repels insects. If over coating is intended, Wood Safe is an excellent primer for use under latex paints and allows a surface to be tinted witht water based stains.
DO NOT DILUTE OR MIX WOOD SAFE fire retardant coating WITH ANY OTHER PRODUCTS.
Avoid wasteful runs and dripping. It should be noted that unlike some products, materials treated with Wood Safe fire retardant coating requires no special cutting tools or special fasteners. Contact parts of any equipment should be stainless steel or plastic to prevent chemical reaction and breakdown. Storage may be done in polyethylene containers.
Wood Safe fire retardant coating provides a structure long term fire retardant protection.
INTERIOR CLASS B RATING ASTM E84 Class B Coating Flame Spread 35
QUICK REFERENCE FOR APPLYING WOOD SAFE FIRE RETARDANT COATING
APPLICATION: Treat before, during or after construction. / Be sure surface is clean and dry before treating. Apply with sprayer head held at 8 to 12 inches from surface. / Apply with brush or roller. / May be necessary to wipe on hardwood surfaces. / Treat all surface areas where possible. / Do not expose treated area to moisture for 24 hours.
Any type of soft woods such as: Yellow Pine, Douglas Fir, SPF, Redwood, plywood and textured plywood
COVERAGE: Apply three (3) coats at 330 - 450 sq. ft. per gallon with the final coverage rate of 110 sq. ft. per gallon
Ft Worth, Dallas, Austin, Houston, TX, San Antonio, Montgomery, Alabama; Phoenix, Arizona; Los Angeles, California; San Francisco, California; Denver, Colorado; Bridgeport, CT; Washington DC; Miami, Florida; Atlanta, Georgia; Honolulu, Hawaii; Boise, Idaho; Chicago, Illinois; Indianapolis, Indiana; Des Moines. Iowa; Kansas City, Kansas; New Orleans, Louisiana; Baltimore, Maryland; Boston, Massachusetts; Detroit, Michigan; Jackson, Mississippi; Newark, NJ; Santa Fe, New Mexico; New York City, New York; Fayetteville, NC; Bismark, North Dakota; Tulsa, Oklahoma; Portland, Oregon; Philadelphia, Pennsylvania; Providence, RI; Charleston, South Carolina; Sioux Falls, South Dakota; Memphis, Tennessee; Salt Lake City, Utah; Richmond, VA; Seattle, Washington; Charleston, WV; Green Bay, Wisconsin; Jackson, Wyoming; Jacksonville, FL; Key West, FL; Orlando, FL; Panama City, FL; Pensacola, FL; St. Petersburg, FL; Sarasota, Florida; Tampa, Fl; West Palm Beach, FL; Clearwater, Fl; South Beach, FL; Daytona Beach, FL; Fort Lauderdale, FL; Fort Meyers, FL, Fort Walton Beach, FL; Gainesville, FL
Flame Safe's WOOD SAFE® (formally J.D.P. 108) is a UL Type 2 (ASTM E84 Class B) fire retardant coating for all interior wood substrates. WOOD SAFE® is primarily used where fire code requires UL Type 2, ASTM E84 Class B fire retardant substrate. Test at Underwriters Laboratories UL and UL Canada indicate Flame Spread rating of 35 and Smoke Development Index < 100. It is an aqueous based resin requiring 3 coats at 330-390 sq. ft. /gallon, final coverage rate 110-130 sq.ft./gallon. It coats and penetrates wood substrates, has a matte finish, can be overcoated with latex paint or stained with aqueous based stains.
