Flame Safe USA
Ph: + 1-817-740 -9197
email: [email protected]
2650 Warfield Ave., Fort Worth, TX 76106
Fire Retardant wood, fire retardant plywood, fire retardant lumber, millworks, wood specialties, I-Joists, MDF, OSB, particle board, T-111, fire retardant timbers
Dallas, Fort Worth, Austin, San Antonio, Houston, Waco, Odessa, Laredo, Brownsville, El Paso, Corpus Christi, Amarillo, Shreveport, Tulsa, Oklahoma , Dallas, , Plano, Frisco, Dallas County, Tarrant County, Abilene
FIRE POLY C-FPCC
IMOR 753 INTERNATIONAL MARITIME ORGANIZATION ASTM F1173-95
Fire Endurance Hydrostatic Evaluation Resolution (MQ) Resolution A.753(18) Appendix 2 and ASTM F1173-95 Section A5 Wet Condition Classification Passed
ASTM E84 XPS PLASTIC PANEL
1/4" HDPE Ridged Plastic panel
ASTM E84, CLASS A
UL 723, NFPA 255, TYPE 1
Flame Spread 0
Smoke Developed 190
Maximum Flame Front 0.0
Clear Fire Retardant Coating for
Composites - plastic - PMMA - PC - PVC - Plastic panels - ABS HDPE and other Thermoplastics
Lexan - Plexiglass - Optix
CLEAR FIRE POLY CFPCC is an high intumescent ASTM E84 Class A, UL723, NFPA 255, TYPE 1 fire retardant coating. CFPCC is formulated for fire treating clear plastics such as PMMA, PC , ABS, HDPE, PVC, Clear Cast Acrylic Panels and other hard to coat clear thermoplastics, with up to 90% clarity. CFPCC requires an adhesion promoter that is supplied with product. ASTM E84 Tests, Surface Bunring Characteristics of Materials, conducted at Intertek Testing Services indicate Flame Spread 0.0, Smoke Developed 100 to 190 FPI Tests based on the ASTM D3806 projected ASTM E84 Flame Spread 10.
QAI LABORATORIES
ASTM E84-18b CLASS A
0.056" PLASTIC SURFACE
Flame Spread 5
Smoke Developed 5
Maximum Flame Front 1.
ASTM D3806 projected ASTM E84
clear plastic panel coated with C-FPCC
ASTM D3806 Flame Spread 0
ASTM E84 Projected Flame Spread 5
CFPCC is the only ASTM E84 Class 'A' , UL Type 1 fire retardant coating available for fire treating clear plastic panels and other hard to coat thermoplastics. CFPCC offers both flame spread resistance and burn through resistance in the same panel, as verified in tests.
CLEAR FIRE POLY C-FPCC
C-FPCC requires an adhesion promoter supplied with product.
Be sure surface is clean and dry
Shake well before use and shake intermittently during use.
Hold can 10" to 12" above surface while spraying.
Spray adhesion promoter lightly over entire surface to be coated.
One can covers 40 to 50 sq. ft.
Allow 15 minutes to dry.
C-FPCC APPLICATION:
Be sure surface is clean and dry before treating.
Apply with brush only, temperature at 45 degree to 90 degrees F
Be sure to allow drying between each coat.
For Plastic Panels apply CFPCC with the substrate lying flat to avoid excess build up that may cause distortion
COVERAGE:
1 Coat @ 125 to 150 sq.ft. per gallon
(11.1 to 13.94 sq. meters per 3.785 liters).
Recommend 3 light coats @ 400 sq. ft. per gallon (37.16 sq. meters per 3.785 liters)
CFPCC 2 QT KIT
2 cans Adhesion Promoters
Clear coating for thermoplastic panels
Covers 67 to 75 sq. ft.
$97.50
CFPCC Gallon KIT
4 cans Adhesion Promoters
Clear coating for thermoplastic panels
Covers 125 -150 sq.ft.
$169.50
CFPCC 5 Gal KIT
16 cans - Adhesion Promoters
Clear coating for thermoplastic panels
Covers 625 -750 sq. ft
$670.00
Adhesion Promoter
4 spray cans
primer, bonding
agent for CFPCC,
FPCC, FP50CC
covers 200 sf
$60.00
2 QUART C-FPCC KIT
2 Quart flame retardant with adhesion promoter. Covers 67 to 75 square feet ((6.225 to 7 square meters), with up to 90% clarity.
1 GALLON C-FPCC KIT
1 gallon flame retardant with 4 spray cans adhesion promoter. Covers 125 to 150 sq.ft. (11.6 to 14 sq. meters) with up to 90% clarity.
5-GALLON C-FPCC KIT
5 gallon flame retardant with 16 spray cans adhesion promoter Covers 625 to 750 sq. ft (58 to 69.7 sq. meters) with up to 90% clarity.
